From the Shed: Scatter Terrain.

I’ve used my 3D printer to run off some useful modern bits of scatter terrain. Not the most exciting bits, definately not in colour terms, but they should be good for set dressing on the table. All of them were printed from free stl files from either Wargaming3D or thingiverse.

thumbnail_20200409_185539

First up we have a set of 6 sewer entrances. As I’ve already got a sewer system, the resin one from Ainsty, these should prove very useful.

thumbnail_20200409_185403

Secondly I ran off a load of Jersey barriers. Great for modern games.

thumbnail_20200409_185305

Finally I did some anti- tank obstacles… well not quite. The eagle eye amongst you might recognise these as concrete beach anti- erosion defences. Whilst they have been popularised in the alt WW2 game DUST Tactics they have also been used in the real world too. The Ukrainians used them successfuly as road blocks to stop an armoured thrust towards Mariopol by Russian/ Sepratist forces.

Once lockdown is over I’ll be able to add these to some games.

Cheers,

 

Pete.

From the Shed: nuke marker and Pripyat sign.

I have managed to get some paint on the first bits of my 3D printed terrain and am really pleased with how it looks.

 

First up is the nuked city marker. Can see this getting some use in megagames as given half a chance most players in those games get rather homicidal if they have any nukes in their arsenals.

thumbnail_20200406_172808

I also pained up the famous Pripyat sign for some games of Zone Alfa, when the club reopens. A simple grey scheme and plenty of weathering seems to set the tone right for the game.

thumbnail_20200406_172827

Cheers,

 

Pete.

3D printer- my initial foray.

As previously mentioned I recieved a 3D printer for xmas and the past couple of weeks I’ve been playing around with it. I have also been looking on various website for as many interesting looking free files that I could find to try out.

20200106_173619

Assembly was a breeze with only one recalictrant cable proving to be difficult so I quickly printed off the test file to see how it turned out. I was rather pleased with the results. Fast and not too noisy (the cat is happy to sleep through it running)- generates a lot of heat though.

20200106_210931

The next day was, however, less succesful due to what is best described as user generated errors. I tried printing out a different figure but that one failed when a support gave way.

 

I decided to get some simpler terrain bits printed, that is after all what I primarily want to use it for. I found some rather nice manhole covers/ sewer entrances so printed off a set of 6 for myself.

20200115_000900

Given how pleased I was with these I tried my hand at rescalling some vehicles and printing them out. I found a 1:100 set of experimental/ prototype WW2 German designs and selected the smallest and resized it to 1:72. The first time I printed it I didn’t reorientate it so whilst one side printed out very nicely the other didn’t do well at all.

20200116_234800

20200116_234814

I asked about and it seems that the correct way to go is tracks down so I tried again. Much better this time, but when it cam to cleaning off the suppors I fear I may have lost some detail.

20200116_234830

On person did suggest printing AFVs with them stood on their rear hull, I’m not really convinced but in the interests of experimentation I’ll give it a go.

 

I also resized some 1:200 WW1 tanks to 1:100 to use with the Great War board game I enjoy. It is a rather chunky print but once cleaned up I rather like it.

20200117_002832

That is where I have got to so far. I want to try some more scenery before I go into full production to make myself a Necromunda set up.

 

Cheers,

 

Pete.

From the Shed: A bit more terrain.

First up is the compound that I made with the parts from Maenoferren which he had 3D printed. I’m really pleased with how this one turned out. Should get lots of use from Colonial through to 21st century. A big thanks to him again.

DSCN1845

I also got some paint on the last bits of Ainsty Casting‘s Sewer section that I had sat about undercoated for at least a couple of years.

DSCN1857

DSCN1858

DSCN1860

It is a nice system don’t get me wrong but it has been a bit of a white elephant costs wise. Today, knowing what I now know I’d go for printed mats but there is still an tangible tactile fun manipulating the resin blocks, not dissimilar to Lego really.

 

For a couple of things I’ve done in the past with it see here and here.

 

Cheers,

 

Pete.

Gifts from Gamers.

One of the best things about being a gamer is the real sense of community that there is, one of the best things about the internet is that it connects people together who share interests but otherwise wouldn’t meet due to geographical separation. Thanks to the generosity of two bloggers I’ve got some more goodies to play with.

 

Man of Tin was kind enough me a sheet of stickers that I was unable to locate in my home town. These will be turned into signs for Zombie apocalypse games as soon as I’ve stocked back up on plasticard.

20190607_163250

Maenoferren generously gave me some bits that he has made with his 3D printer that he has no use for.

20190607_163323

20190607_163439

 

I had some spare foamcore and an MDF base lying around so knocked up this quick compound with the two houses.

20190607_165028

I also put some paint on the Sci Fi terrain bits, specifically the chemical tank too.

20190610_194723

These sorts of gestures really are the best and both brightened my day immeasurably when they arrived- many thanks to both bloggers, It is something I fully intend to pay forward.

 

As an aside the quality of the prints is really good, far better than the stuff I bought from Shapeways some years ago. So good in fact that I’m going to save up for my own printer- I really think it will be the future of the hobby (amongst other things) so it will be good to get in early for once I think.

 

Cheers,

 

Pete.

From the Shed: bits and pieces (WW2, Science Fiction and Terrain).

Some more from my shed- some assorted bits that I had lying around finally finished, all in 20mm too…

 

Firstly:

 

commandos in denison smocks 1

A set of WW2 British Commandos, these are from Wartime Miniatures (seemingly defunct now). These ones are wearing the Denison camo jacket, a similar pattern to the airbourne one, making them emminently suitable for a game set on Walcheren Island as part of the operations to clear the Schelt esturary. Shame that it looks like more poses with different weapons won’t be forthcoming.

Sticking with WW2 we have these:

strelets hungarians

A small group of Honved (Hungarian Army) from this set of plastics. I did these as paint testers for a bigger Crossfire/ Megablitz project, more of which later. Not the best sculpts in the world but they paint up very nicely.

Staying with plastics I have done these:

stalker figures

A set of figures by Dark Alliance inspired by the popular S.T.A.L.K.E.R. PC games. I’ve got several of each pose in the box so for the first lot I picked out a few poses to do with a winter theme (I’ve a fondness for winter basing at the moment). Not sure what I’ll do with them but they make their way into a game some how.

 

Sticking with PC games I made this:

firing range targets

A set of firing range targets after seeing similar ones in the co-op shooter Insurgency that I played with friends a while back. Bits of foam, ground texture and scrap from the bits box went into making this. Should be good to suggest a camp or base somewhere in MENA.

 

Cheers,

 

Pete.

From the Shed- Ruined European house.

Evan was kind enough to gift me this Airfix ruin a good few years back… it had been sat in my shed for ages with me looking at it thinking I should reaaly gt round to doing something with it.

DSCN1731

I was a little put off by the very square looking blast hole but it is a lot less pronounced now it is painted.

DSCN1732

Detail was added with filler, cat litter and match sticks.

DSCN1733

I decided that the lower levels were too small for my fat fingers so filled them with rubble.

DSCN1734

Painting was done with acrylics as usual.

DSCN1735

It will be a nice addition to my NW Europe terrain set up.

 

Cheers,

Pete.

From the shed: some 20mm scatter terrain.

Yet more comes from the shed, this time for my 20mm/  1/72nd collections.

Bill gave a plastic shed that he didn’t want- he had bought it as a partof a job lot of second- hand railway bits. I quick coat of paint and a bit of weathering resulted in this:

shed

I think it turned out quite nicely, will be nice tucked into the edge of a field in a rural setting or possibly at the end of a garden.

telegraph poles 1

telegraph poles 2

The telegraph poles were designed and laser cut by  friend, based on a picture from a book on the fighting in Sicily in WW2. Not the most exciting of items but they’ll look good lining a road.

 

Cheers,

 

Pete.

From the Shed: 6mm terrain.

I picked up these bits of terrain from the Leven Miniatures clicky stand at the Fiasco show last year and have just got round to getting them painted.

oil tanks

A nice collection of storage tanks to add to and industrial area.

 

police hq

This is sold as the police station but to my eye it should work as any office block really. I kept the paint scheme neutral for that reason.

tv station

The TV station. The bit with the antenna coming out of it is removable, which adds flexibility to the piece.

porta cabins

I picked up two packs of Portacabins as I figured they’d be useful at add to other bits. I painted up this pair to see what they were like.

oil donkeys

This pair of oil ‘nodding donkey’ pumps were from Perfect 6  miniatures clicky (sold through Leven at shows).

 

All of the pieces were very well cast in resin with a nice level of detail and a pleasure to paint up. They should be good for my 20th century 6mm set ups.

 

Cheers,

 

Pete.

From the shed: A selection of kits from Anyscale Models

Anyscale Models are a relatively new resin manufacturer who make kits in either 1/72nd or one 1:56, whilst a lot of the range is geared towards railway modellers there is plenty aim at the wargamer. I put in a small order a bit back and have just got round to finishing them all off.

DSCN1533

DSCN1534

This pair of FIAT armoured lorries were made by the Italians and then taken into service by the Germans after the 1943 armastice. They are ideal for partisan games in the north of Italy during the last few years of the war. I painted them in acrylics and gave them a heavy weathering with a sponge.

DSCN1538

A simple field kitchen, ostensibly British and WW2 will do duty everywhere for  those raid on a base camp style scenarios.

DSCN1539

This pipe is meant to be scaled for 1:56/ 28mm wargaming but it is generic enough to be used for either I think. Again painted with a sponge.

I highly recommend looking at Anyscale, a decent range and it is all very competitively priced. I will be certainly ordering from them again soon.

Cheers,

 

Pete.